Generally speaking, when decorating a wardrobe, there are several types of boards available:

Making wardrobe boards: 1. Plywood

Plywood is a board like material formed by cutting wood into veneers or sheets, and bonding them together with glue under certain temperature and pressure for a certain period of time. Common types include plywood, plywood, plywood, and plywood (commonly known as plywood, plywood, plywood, and plywood in the market). Plywood has common defects such as low bonding strength, blistering, localized delamination, and warping.

Making wardrobe boards 2. MDF

There are several types of density boards, and the thickness varies greatly. If used for wardrobes, they are usually 1, 2, or 1.5. However, the boards used for wardrobes are generally called composite boards, which have single-sided and double-sided distinctions and patterns. Using composite boards to make them may result in some nail holes that are not aesthetically pleasing. The density board oiling is convenient and the construction is between the two cities.

Woodworking boards can be connected by mortise and tenon, nails, and screws, which is convenient for construction, but surface treatment is more complicated than these. Moisture proof board is particleboard, which is commonly seen in the market as already veneered, does not require painting, and has low cost. It is now commonly used to make cabinets.

Making wardrobe board 3. Large core board

The cabinet core is made of 12cm large core board, and fireproof board or waterproof wood grain paper is used inside the cabinet. The appearance uses a 3cm color panel (available on the market: Shabili/Spade/Red Sandalwood/Beech, etc.), depending on your personal preference.

When making large core boards, it is necessary to stick the panels, which will definitely be painted. The cost and composite board are completely different. Of course, in terms of hardness and quality, it will definitely be much better. It is better to use large core boards for wardrobes. The strength of finger joint boards of the same level is not as high as that of large core boards, especially since wardrobes have a larger span and require higher strength; If you want to use a direct board for higher strength, you will need to seal the panel, which will increase the cost accordingly.

Making wardrobe panels 4. Paint coated panels

The base material of the baked paint board is density board, and the surface is baked six times with imported paint (three bottom, two sides, one gloss) at high temperature. At present, the 'baking paint' used for wardrobes only describes one process, which is to treat the base door panel with paint that is heated and dried in the drying room after painting. The characteristics of baked paint board are bright color, easy to shape, strong visual impact, very beautiful and fashionable, good waterproof performance, strong stain resistance, and easy cleaning. The disadvantage is that it requires a high level of craftsmanship and a high scrap rate, resulting in high prices; Careful care should also be taken during use to avoid bumps and scratches. Once damaged, it is difficult to repair and needs to be replaced as a whole; Color difference is prone to occur in kitchens with high levels of oil fumes.

Make wardrobe board 5. Fireproof board

Fireproof board type door panels are currently the most commonly used door panel materials, with bright colors, diverse edge sealing forms, and advantages such as wear resistance, high temperature resistance, scratch resistance, penetration resistance, easy cleaning, moisture resistance, non fading, delicate touch, and affordable price.

The base material of the fireproof board door panel is particleboard, moisture-proof board or density board, and the surface is decorated with fireproof board veneer. Domestic fireproof door panels have lower prices, while the cost of Korean and German panels increases by about 25% and 50%, respectively.

Fireproof board conforms to the development trend of combining "beauty and practicality" in wardrobes, and therefore has been thriving in the market for a long time. Its disadvantage is that the door panel is flat, which cannot create three-dimensional effects such as concave convex and metal, and the fashion sense is slightly poor.

Fireproof board is a decorative board made by using silicon or calcium materials as the main raw materials, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives, and chemical additives, and made by steam pressing technology.

Making wardrobe boards 6. Solid wood boards

Using solid wood to make wardrobe door panels, the style is mostly classical and usually priced higher. The door frame is made of solid wood, mainly in cherry, walnut, and oak colors. The door core is made of medium density board with solid wood veneer. During production, the surface of the solid wood is generally textured and painted to maintain its natural wood color and beautiful shape. This can ensure the special visual effect of solid wood, and the combination of the frame and core board can also ensure the strength of the door panel.

Making wardrobe boards 7. Particle board

Particle board is made by cutting or shaving the trunks and branches of artificial and natural forests, and is formed under high temperature and high pressure. The advantages are low expansion rate, strong stability, and low price. The disadvantage is that the edge gripping force is small, the strength is insufficient, and the visual roughness is rough.